Bathroom design guide - zones, storage, tiles and light
Wet and dry zones, vanity and storage, slip-resistant tiles, ventilation and lighting - a plain-language guide to planning a practical bathroom.
Bathrooms in most apartments are small, used by several people every morning, and wet almost all the time. That combination is why so many of them go wrong: a floor that is always damp, a vanity with swollen doors after one monsoon, toiletries lined up on the window sill because there is nowhere else, and a mirror that fogs up every time someone showers.
The good news is that most bathroom problems come from a few early decisions. Get the zones, the materials, the storage and the ventilation right, and the finishes can be as simple or as indulgent as you like.
Start with wet and dry zones
The single most useful idea in bathroom planning is separating the wet area from the dry area.
- The wet zone is the shower, where water splashes freely.
- The dry zone holds the toilet, the washbasin and the vanity.
When the shower is separated, the rest of the floor stays dry. That means less slipping, less mould, less mopping and cabinets that last much longer.
There are a few ways to separate them:
- A glass shower partition, fixed or with a door. It keeps the room feeling open and light.
- A shower curtain on a rail. The budget option, and easy to replace.
- A small step or a change in floor level with its own drain, so water stays in the shower area.
- Placement alone, putting the shower at the far end of the bathroom, away from the door and the vanity.
Changing floor levels, adding drains or moving plumbing points must be done by a qualified plumber, and the floor needs proper waterproofing, laid by a qualified professional, before any tiles go down.
Separate the wet from the dry, and half of the usual bathroom problems never appear.
Plan the layout around the plumbing
In apartments, the positions of the drain and the soil pipe are mostly fixed by the building. Moving the toilet in particular is often difficult or not possible. Find out what can and cannot move before you fall in love with a new layout.
A typical sequence from the door is basin and vanity first, toilet next, shower furthest away. That keeps the wettest area away from the door and the most used fixture closest to it. Leave enough clear space in front of the toilet and the basin to stand and move comfortably, and check that the door does not hit anything when it opens.
Vanity and storage
A bathroom needs more storage than people expect. Toiletries, towels, cleaning supplies, spare soaps, hair dryers and medicines all need a place.
- A wall-hung vanity under the basin keeps the floor clear, is easy to clean under and stays out of any stray water.
- Choose water-resistant materials for the carcass. Ordinary boards swell when they get wet. Our guide to plywood, MDF and HDHMR explains which boards cope with moisture.
- Drawers are easier to use than deep shelves under the basin, as you see everything at once.
- A mirror cabinet above the basin doubles as storage for daily items.
- Wall niches in the shower hold shampoo and soap, so bottles are not on the floor or balanced on taps.
- A tall, narrow unit or open shelf in an unused corner can hold towels and spares.
Keep electrical items, such as hair dryers and trimmers, in the dry zone with a properly installed socket nearby. Any bathroom wiring should be done by a qualified electrician.
Tiles and slip resistance in plain terms
Bathroom tiles do three jobs: keep water off the walls and floor, survive daily cleaning and stop people slipping.
- Floors: choose matt, textured or anti-skid tiles. Glossy floor tiles look beautiful in a showroom but become slippery when wet, which is exactly when you walk on them.
- Shower area: the floor here needs the most grip. Smaller tiles mean more grout lines, which also helps feet grip.
- Walls: glossy or matt both work. Large wall tiles mean fewer grout lines to clean.
- Grout: a slightly darker grout shows dirt less than bright white. Ask about stain-resistant grout for the shower area.
If there are elderly family members or small children, give extra weight to slip resistance and consider grab bars near the toilet and in the shower. For more on comparing tile finishes and other floor materials, see flooring options compared.
Ventilation keeps everything else working
Poor ventilation is behind most bathroom problems: mould in the corners, peeling paint, a musty smell and fogged mirrors.
- An exhaust fan that vents outdoors is essential in any bathroom, especially those without a window.
- If there is a window, keep it in use. Frosted or louvred glass gives privacy and airflow.
- Leave the door ajar after showers to help the room dry.
- Choose paint made for damp areas on any walls that are not tiled.
Lighting for both mood and task
Bathroom lighting has two jobs: lighting the whole room and lighting your face.
- A ceiling light gives general light. In a false ceiling, use fittings rated for bathrooms.
- Mirror lighting on the sides or above the mirror lights the face evenly for shaving and make-up. A single light directly overhead casts shadows under the eyes and chin.
- A soft light in a niche or under the vanity is pleasant at night and avoids switching on a bright light at midnight.
All fixtures must be suitable for damp areas and installed by a qualified electrician. Keep switches in the dry zone.
Finishing touches that make it easier
- A hook for every towel and robe, placed near the shower.
- A small shelf or ledge near the basin for the things you use daily.
- A shower mixer that is easy to reach without standing under the water first.
- Health faucet and toilet roll holder within easy reach of the toilet.
- Plants that enjoy humidity, if there is daylight.
If you are redoing a bathroom while living in the home, plan for the noise and the temporary loss of a bathroom. Our guide to renovating a lived-in home explains how to manage it.
If you would like a bathroom planned properly from the zones to the last hook, tell us about your home.