How to read an interior quotation and compare two quotes fairly
Line items, units, material and hardware specs, exclusions and payment stages - what to check in an interiors quote before you sign anything.
You have two or three quotes for your interiors, and the totals are far apart. The temptation is to pick the lowest, or to assume the highest must be the best. Neither is a safe bet, because the totals are not measuring the same thing.
A quotation is not just a price. It is a written description of what you will receive. Read it that way, line by line, and the differences between quotes start to make sense. Some are cheaper because they include less. Some cost more because they specify better materials. Some leave important items out entirely and add them later.
Here is how to read one properly.
Start with the scope summary
A good quote begins with a clear list of what is covered, room by room. Check it against the scope you agreed. Is every room there? Is every unit you discussed listed - the shoe rack in the foyer, the loft above the wardrobe, the study desk in the second bedroom?
Missing items are the most common source of later surprises. If something you discussed is not on the page, assume it is not included until someone confirms otherwise in writing.
Understand the units of measurement
Interior quotes use different units for different items, and it helps to know what each one means.
- Square feet is common for wardrobes, TV units and wall panelling, usually measured as the front face area of the unit - width times height.
- Running feet or running metres is often used for kitchen base and wall cabinets, countertops, skirting and cornices.
- Per piece or lump sum is used for loose furniture, appliances, accessories and some fittings.
- Per point is used for electrical work, such as a new socket or light point.
When comparing two quotes, check that a wardrobe measured in one is measured the same way in the other. One quote may include the loft in the wardrobe area; another may list it separately.
Look for the specification, not just the description
"Wardrobe - 7 x 8 ft" tells you the size. It does not tell you what it is made of. A useful line item answers these questions:
- What is the core board, and what grade? Is it moisture-resistant or waterproof where needed?
- What is the thickness of the board for carcass, shutters and back panels?
- What is the external finish - laminate, veneer, acrylic, lacquer, paint?
- What is the internal finish? Many quotes use a cheaper laminate inside, which is reasonable, but you should know.
- What edge banding is used?
- What hardware is included - type of hinges, channels, lift-ups, handles?
If a quote simply says "standard" or "as per design", ask what standard means. Vague specifications make it easy for the material to change quietly. Our guide to plywood vs MDF vs HDHMR can help you understand what you are being offered.
Hardware and accessories deserve their own lines
Kitchen baskets, corner units, tall pull-outs, wardrobe accessories and lift-up mechanisms can add up to a meaningful part of the total. A good quote lists them individually, with type and quantity.
Watch for quotes that bundle everything into a single kitchen figure. You cannot compare that with anything, and you cannot see what you are giving up if the number is lower.
Read the exclusions carefully
Every quote has exclusions. The honest ones list them clearly. Common exclusions include:
- Civil work, demolition and debris removal
- Electrical and plumbing changes
- False ceiling and painting
- Countertop stone, sink, tap and appliances
- Loose furniture, mattresses, curtains and decor
- Light fittings
- Taxes, transport and installation
None of these is wrong to exclude, as long as you know. A quote that looks lower may simply have left out the ceiling, the painting and the electrical work that another quote includes.
The most expensive quote is often the one that leaves the most out.
Check the payment stages
Most projects are paid in stages linked to progress - for example, a booking amount, a payment at design sign-off, a payment when production begins, a payment on delivery and a final payment after handover. The exact split varies by company.
What matters is that each payment is linked to a clear milestone you can verify, and that some amount is held until snags are fixed. Be cautious about paying most of the project value before anything has been made.
Look for the terms that protect you both
The fine print is worth reading slowly. Look for:
- What happens if the scope changes, and how variations are priced
- What happens if site measurements differ from the drawings
- The expected sequence of work and who coordinates other trades
- Who is your single point of contact
- How after-handover issues are handled
If any of this is missing, ask for it in writing. It is not about distrust. Clear terms make the project smoother for everyone.
Check that the quote matches the drawings
A quote should be prepared against a specific set of drawings. If the drawings change, the quote should change with them. Ask which version of the design the quote is based on, and keep both together.
This matters more than it sounds. If a wardrobe grows taller in the final 3D view, or a kitchen gains a tall unit, the original quote no longer describes what will be built. Make sure any revision is reflected in an updated quote before production starts, not discovered on the final invoice.
How to compare two quotes fairly
Put both quotes side by side and work through them in this order:
- Confirm the same rooms and the same units are included.
- Confirm the sizes and units of measurement match.
- Compare the board, finish and hardware specification for each major item.
- List everything excluded from each, and estimate what you would need to add.
- Compare the payment schedule and terms.
- Only then compare the totals.
Often you will find that the gap between two quotes shrinks, or reverses, once you account for scope and specification. If you have not yet worked out what drives these numbers, our guide on what drives interior design cost is a useful companion to this one.
If you would like a clear, itemised quote you can compare with confidence, share your project brief and we will prepare one.