← All articles

Kitchen chimney and hob guide - how to choose and plan them

How to think about chimney type, size and the ducting route, and whether a built-in hob or a cooktop suits your kitchen better.

Monochrome kitchen with a breakfast counter and black pendant lights

The chimney and hob are usually picked last, often from a shop floor, after the kitchen design is already done. That is backwards. These two appliances decide where the gas line runs, where a hole goes through the wall, how tall the wall cabinets can be and how clean your kitchen stays after years of daily cooking.

Choose them early, and the kitchen is built around them. Choose them late, and you end up with a duct snaking across the ceiling, a chimney narrower than the hob or a hob that will not fit the cut-out.

This guide is about how to think through the choice. We deliberately avoid brand names and technical ratings, because the right specification depends on your model and your room, and a good supplier should confirm it for you.

Start with how you cook

Indian cooking is hard on ventilation. Tadka, deep frying and long pressure-cooker sessions produce smoke, oil mist and steam, often several times a day. A kitchen that cooks this way needs a chimney that captures and removes all of that, not one that simply circulates air.

A household that mostly boils, steams and reheats can manage with a lighter setup. Be honest about which one you are.

Ducted or recirculating

There are two basic ways a chimney deals with what it captures.

  • Ducted (extraction): the air is pulled through filters and pushed outside through a duct. This is the right choice for most Indian kitchens, because it actually removes smoke, heat and smell from the home.
  • Recirculating (ductless): the air passes through filters, including a charcoal filter, and is blown back into the room. It catches some grease and odour but leaves the heat and much of the moisture inside. It is a fallback for kitchens where ducting outside is truly impossible.

If you have any way to duct outside, do it.

Chimney types by shape

  • Wall-mounted: the most common. It sits on the wall above the hob, with the canopy and a vertical cover over the duct.
  • Island: hangs from the ceiling above a hob on an island. It needs a ceiling duct route, which takes more planning and usually costs more.
  • Built-in or integrated: fits inside a wall cabinet, so only the underside is visible. It gives a cleaner look but leaves less room for storage in that cabinet.
  • Angled or curved-glass fronts: a styling choice that gives more headroom when you lean over the hob.

Filters, in plain words

The filter catches oil before it reaches the motor and duct.

  • Baffle filters: layered metal panels that change the direction of the air so oil drops out. They suit heavy Indian cooking well and are washed periodically.
  • Mesh filters: fine metal mesh that traps grease but clogs faster with heavy frying, so it needs frequent cleaning.
  • Filterless designs: use the shape of the chimney to separate oil into a collector. Often easier to maintain, though the collector still needs emptying.

Some chimneys offer an auto-clean feature. Treat it as a convenience, not a reason to skip regular cleaning.

A chimney is only as good as its duct. A strong motor pushing through a long, twisting pipe performs like a weak one.

Get the size right

The simplest rule: the chimney should be at least as wide as the hob, and a little wider is better. A chimney narrower than the hob lets smoke from the outer burners escape around the edges.

For the height above the hob, follow the manufacturer's installation instructions for your specific model. Too high and it captures less. Too low and it gets in the way of tall vessels and your head.

Plan the ducting route early

This is the part most often left too late. Before the wall cabinets are designed, decide:

  1. Where the duct exits. The shortest, most direct route to an outside wall is best. A window or a wall cut-out to the utility balcony is common.
  2. How many bends. Each bend reduces airflow. Aim for as few as possible.
  3. What kind of pipe. A smooth, rigid duct generally performs better and collects less grease than a long, crumpled flexible one.
  4. How it is hidden. The duct may run inside a cabinet, behind a false ceiling or through a boxed-in panel. Each affects the storage and the ceiling design.
  5. Who cuts the wall. In apartments, a core cut through an outside wall may need the building's permission, and should be done by a qualified professional.

Include a non-return flap at the outlet if the duct faces wind or rain during the monsoon.

Built-in hob or cooktop

Once ventilation is planned, choose the cooking surface.

  • Built-in hob: set into a cut-out in the countertop, flush or nearly flush with it. It looks cleaner, is easier to wipe around and fits the modular look. The cut-out has to match the hob exactly, so choose the model before the countertop is fabricated.
  • Freestanding cooktop: sits on top of the counter with a gas pipe at the back. It is the budget option, easy to replace and needs no cut-out, but food and grease collect around and under it.

What to look for in a hob

  • Number and spacing of burners. Think about whether you use a large kadai and a pressure cooker at the same time, and check that both fit side by side.
  • Burner sizes. A mix of large and small burners is more useful than identical ones.
  • Top surface. Glass looks sleek and wipes clean but can chip if hit hard. Steel is tougher but shows marks.
  • Safety features. Ask whether it can cut the gas supply if the flame goes out. This is worth having.
  • Ignition. Built-in ignition saves a lighter, but check how easy it is to service.

Induction hobs are another option, useful for households that want a flame-free surface or a backup to gas. They need compatible vessels and a suitable electrical supply, so involve a licensed electrician.

Safety and installation

Gas pipework, connections and any electrical points for the chimney or hob should be done by qualified professionals. Plan the chimney socket and the gas valve position into the drawings, so they are reachable without dismantling a cabinet.

Bring it into the design

When you meet your designer, bring the hob and chimney models you are considering, or at least their dimensions. That lets the cut-out, cabinet heights and duct route be drawn correctly from the start. It is one of the details we cover in modular kitchen mistakes to avoid.

If you are planning an open kitchen, ventilation matters even more, as we explain in open vs closed kitchens. And the lighting built into the chimney is rarely enough on its own, which is why our kitchen lighting guide covers the hob area too.

Planning a kitchen and unsure how to route the chimney? Tell us about your space and we will work it into the design.

Keep reading

More from the blog.